Uzbekistan, 100000 Tashkent, st. Asaka, 39
+998 (78) 1484747+998 (71) 2082401

Architex 3030 OV - Professional, high quality acrylic, vapor-permeable, breathable base water-based paint. Provides a high hiding power. Covers lightly colored substrates in one pass (layer). Matt. Virtually odorless. Contains substances that prevent the formation of mold and mildew. Washable according to DIN53778 up to 10,000 passes. Supplied in white (base P). It is tinted both manually and on the SPS tinting machine using universal concentrated dyes.

Suitable for all types of interior work in dry rooms and rooms with high humidity.

Possible bases for use: cement plaster, plaster, wallpaper, concrete, brick, plasterboard, fiberboard, etc.

Initial painting in two layers. For the first layer, add water up to 10%. It is not recommended to dilute the second layer. Drying time between layers 6-8 hours. Complete drying for 24 hours. Full hardening 10-14 days.

Supplied in packs of 4 and 10 liters. Consumption 11-13 square meters per liter, depending on the absorbency of the surface in a single layer.

Binder composition:
Acrylate resin dispersion.

Pigments:
White - titanium dioxide and mineral fillers.

Solvent:
Water.

Constant components:
59% of the mass.

Specific gravity:
Approximately 1,470.

Viscosity:
Viscolab LC 3: 10.5 PaS

Particle grinding size:
50 microns

Gloss level:
Matt (degree of reflection 2 - 5%).

Color:
White.

Shelf life:

Minimum - 18 months, in well sealed packaging, in a dry, cool place at temperatures above + 3 ° С
Do not use at temperatures lower than +8 C.
Allow freshly cemented substrates to dry for at least 6 weeks.
Ventilate the room during use.

Application technology:

Stir the paint well before use. When applying the first layer, dilute the paint with water up to 10% by volume. The second coat should be applied with undiluted paint.

Paint is applied using a block brush, fur roller or airless spray.

The substrate must be clean, dry, free from dust and grease. Cracks, cracks, irregularities must be putty, lagging, unstable layers must be removed.

Treat the surface with a deep penetration primer.

Loose bases:
Rinse thoroughly with clean water, remove loose layers, allow to dry, prime with deep penetration primer.

Painted surfaces (whitewash, w / e paint):
Thoroughly rinse off the lagging layers, allow to dry, treat with a deep penetration primer.

Concrete:
Thoroughly remove false skin and powdery plaque with a steel brush, fill cracks, allow to dry, treat with a deep penetration primer.

Aerated concrete:
Pre-treat with a special primer that eliminates increased absorbency, apply a layer of plaster, allow to dry, treat with a deep penetration primer.

Plasterboard panels:
Glue the seams with a serpentine and putty, allow to dry, treat with a deep penetration primer.

Fiber boards (MDF, fiberboard, chipboard, etc.):
Sand smooth boards, free of dust, then treat with an insulating primer (eg SPS Isotec).

Existing paint layers:
Rinse with water and degrease. Allow to dry. Sand shiny layers and remove dust.

Existing stains (nicotine, smudges, rust, etc.):
Rinse with water, degrease, allow to dry, treat with an insulating agent (eg SPS Isotec).