Centrifugal compressors Centak standard pressure
The base frame is a structural unit of the Centak range. The compressors inside the base frame have a unified oil tank frame, cast parts of the compression unit, bearings, seals, starting and main oil pumps, refrigerators.
The compressor capacity inside the base frame can be selected in steps of 10 m³ / min. The capacity and pressure are determined by the combination of rotors, their rotation speeds, profiles and the number of rotor blades and diffusers.
For large frames, such combinations can be up to 90. It is this unique feature that distinguishes Centaki from any other "standard" centrifugal compressors, allowing you to select with the highest efficiency the performance and pressure of the compressor to the needs of the customer.
Description
Simplicity of design
100% oil-free non-contact compression cycle
Reduced performance up to 35% without bypass
Single point air and water connections, reducing installation costs
Main oil pump driven by gearbox provides lubrication during coasting
Loss-free condensate trays are standard on all models
Compulsory anti-corrosion protection of all internal channels
Advanced microprocessor-controlled proprietary CMC® controller monitors all critical system parameters in real time
Automatic dual mode control with pressure maintenance accurate to 0.05 bar
On-screen start-up and basic maintenance instructions simplify operation
Intermediate coolers and end coolers are designed for 6 ° C suction and flow temperature differences
All components are manufactured in accordance with global standards and are labeled as suitable for use
Complete factory tests
Careful selection of system components to ensure superior performance
Noise level 82 dBa (measured in anechoic conditions with standard ODP motor)
Characteristic
Frame-base | Pressure, Bar | Productive m³ / min | power, kWt | Length mm | Width, mm | Height, mm | Weight, kg |
CV1 MX2 | 8,0 - 9,5 | 20 - 45 | 170 - 270 | 2800 | 1600 | 2100 | 4300 |
C400 MX2 | 6 - 8,5 | 45 - 70 | 170 - 350 | 3100 | 1600 | 2200 | 4700 |
C700 MX2/3 | 4,5/5,0 - 10,5 | 60 - 115 | 270 - 700 | 4850 | 1770 | 2445 | 6700 |
C950 MX2/3 | 3,5/6,0 - 10,5 | 120 - 185 | 500 - 1000 | 4300 | 2300 | 2150 | 12000 |
3ACII MX2/3 | 4,5/5,0 - 11,5 | 170 - 255 | 700 - 1600 | 5600 | 2500 | 2300 | 17400 |
C3000 MX2/3 | 4,0-5,0/6,0-11,0 | 270 - 450 | 800 - 2200 | 7100 | 3000 | 3100 | 35000 |
5CII MX2/3 | 4,5/5,0 - 11,5 | 450 - 800 | 1500 - 4000 | 7500 | 3600 | 3000 | 43000 |