GRACO has been producing its marking equipment for decades and has improved its models to the maximum for convenient and high-quality use in difficult working conditions. All presented models have a similar design and principled method of work. But they differ in characteristics and configurations to meet the requirements of each customer.

Check out the Graco LineLizer range of horizontal and vertical airless paint markers.

The LINELAZER 3400 is a one-gun road striping machine. Accordingly, the device draws only one line. In this regard, the device is perfect for marking parking lots, large parking lots and courtyards. Not the greatest power of the device - this is its plus, since LINELAZER 3400 is light in weight and dimensions. The rest of the design features of the device keep it at a professional level, which guarantees years of trouble-free operation.

Benefits:

• The improved wheel design reduces the effort required by the operator to move the unit.
• Comfortable handling thanks to the anatomically shaped handle.
• The swivel front wheel makes it easy to mark all the way along the road. Ease of drawing rounded lines.
• The electronic pressure regulator allows for high quality striping.
• Chromex pumps are used for most road marking applications.
• The use of a single-stage gear train increases the system's resiliency.
• The control buttons are located directly on the handle - the ability to change the settings without stopping the work process.

LINELAZER IV 3900 is the perfect solution for a start-up road marking company, as it applies all the paints permitted for this. The device can work with one or two guns at the same time. LINELAZER IV 3900 will be an indispensable solution for marking parking lots and public roads.

The LINELAZER IV 5900 is a leader among the competitors in dual-pistol operation. The clearest and richest lines. The best quality of work performed. The most popular model among professionals. The device is suitable for continuous operation on long-distance highways.

LINELAZER IV 200HS - the model for the largest volumes of work. Unsurpassed marking quality throughout the entire work cycle on site. To experience the full power of this model, GRACO recommends using the LINALAZER IV 200HS with the LINEDRIVER self-propelled kit.

Graco GrindLazer - line strippers

GRINDLAZER is a professional, modern and, at the same time, budget device for removing any horizontal road markings from any surfaces. Removing the markings is carried out by mechanical action, similar to an electric plane for wood. The operating speed and options for use depend on the selected model and equipment.

GRINDLAZER 390 is the smallest device from the line. Designed to remove paint, plastics, epoxies and smooth uneven surfaces. Removal occurs when moving forward. The speed of removal of line markings with a depression of 3.5 mm with manual use is 75m² / hour, while driving with LineDriver - 160m² / hour.

Benefits:

Pneumatic tires, comfortable grips, chassis design (similar to the LineLazer) - all this helps to reduce vibration and increase operator comfort.
The “Forward Cut” system allows you to easily adjust the cutting depth for optimal cutting depth.
The presence of a centrifugal clutch allows you to quickly start / stop the work of the cutters, making this installation the safest among the analogues on the market.
A one-of-a-kind setup that allows you to adjust the position of the cutting element in the top or bottom position, which provides a wide range of options for removing coatings.

GRINDLAZER 270 is the smallest device from the line. Designed to remove paint, plastics and smooth uneven surfaces. Removal occurs when moving forward. The speed of removal of line markings with a depression of 3.5 mm with manual use is 55m² / hour, while driving with LineDriver - 120m² / hour.

Benefits:

• The use of the TriBelt ™ 3-toothed belt optimizes power transmission and increases maximum load.
• Pneumatic tires and a swiveling front wheel allow safe travel on uneven surfaces with minimal vibration.
• The presence of a rotating front wheel allows for increased maneuverability, does not require much physical effort on the part of the operator.
• The centrifugal clutch allows quick start / stop of the cutters and also provides a quick start even in cold weather.

GRINDLAZER 480 is intended for smoothing uneven surfaces, grooves, grooving and removing paint, plastic, epoxy resins. Removal occurs when moving both forward and backward. The speed of removal of line markings with a depression of 3.5 mm when driving with LineDriver is 195m² / hour.

The presence of a centrifugal clutch allows you to quickly start / stop the work of the cutters, making this installation the safest among the analogues on the market.
A one-of-a-kind setup that allows you to adjust the position of the cutting element in the upper or lower position, which provides ample opportunities for removing coatings.
Adjustable handles (same as LineLazer) increase operator comfort and reduce vibration.

Graco FieldLazer. Marking of sports grounds

FIELDLAZER ™ is an airless sports field marking machine. The device is designed to be as convenient as possible for marking sports fields covered with lawns. Accordingly, it can mark any other sports field with the same excellent success.

FIELDLAZER ™ is easy to handle.
Its small dimensions and weight allow it to be transported folded even in the trunk of an average sedan.
High productivity allows you to draw a bright and clear line in just one pass.
The paint is taken directly from the container in which it is supplied. And the power of the device allows you to apply it immediately, without diluting. The built-in filter removes any paint defects, which positively affects the quality of the lines. The paint pressure is automatically regulated, preventing it from being exceeded, due to which the device itself saves material and does not allow unnecessary paint splashing and the formation of aerosols in the air.
Large light-alloy wheels allow you to easily move the device around the sites during operation.