Uzbekistan, 100000 Tashkent, st. Asaka, 39
+998 (78) 1484747+998 (71) 2082401

Rn series one - and two-stage with frequency inverter 37-225 kW (1.64-45.3 m³ / min.)

All Ingersoll Rand Rn / Rne rotary screw compressors are equipped with the latest generation of 1 or 2 stage screw units, designed using the latest advances in compressor technology and a long history of previous generation screw compressors.

Ingersoll Rand compressor screw blocks are manufactured by the GHH-RAND division of the company. They do not require maintenance throughout their entire service life, except for periodic oil changes once a year or 8000 operating hours.

Description

The screw compressor of the "Rn" series with variable capacity is the modernized successor of the compressors of the "NIRVANA" series with engines over 37 kW. Compressor units of the "Rn" series instantly respond to the required amount of compressed air, reducing or increasing their performance when disconnecting or connecting production equipment, saving energy and optimally supplying compressed air to the production process. This is achieved through an integrated motor speed converter and Ingersoll Rand's unique and advanced Hybrid Permanent Magnet (HPM®) motor technology. This motor has a higher efficiency, compared to asynchronous motors used in compressors from other manufacturers, it can be switched on and off an unlimited number of times during an hour. The starting currents of the HPM® motor are 7–10 times less than that of induction motors. The efficiency of a permanent magnet motor does not change over the entire range of rotation speeds, in contrast to induction motors, the efficiency of which depends on the speed of rotation of the engine and drops to 50-60% when the number of revolutions decreases. This results in an additional energy saving of approximately 15% compared to other variable speed compressors and induction motors.

Also, unlike asynchronous motors, the HPM® motor has no restrictions on the number of starts / stops, which allows it to start an unlimited number of times - as a result, the NIRVANA compressor does not have an idle mode, i.e. actually has a regulation range from 0 to 100%. In the "idle" mode, the compressor does not generate compressed air, and its main electric motor continues to work and consume electricity, this mode is the most uneconomical in the operation of compressors. Also, the HPM® electric motor has no bearings in its design and therefore does not require maintenance.

Characteristic

Model

power, kWt

Productive 7.0 / 8.0 / 10.0 / 14 Bar, m³ / min

Noise level, dBA

Dimensions LxWxH, mm

Weight, kg

R45n

45

1,64-7,42/1,67-7,02/1,76-6,46/ -

69

1950x1115x1610

1039-1129 (TAS)

R75n

75

3,23-13,56/3,23-12,66/3,23-11,50/ -

69

2432x1265x2032

1718 - 1868

R90n

90

8,4-18,8/8,6-17,1/9,15-14,3/ -

74

2703x1466x2032

2060 - 2420

R110n

110

8,4-21,8/8,6-20,2/9,1-17,4/ -

74

2703x1466x2032

2060 - 2420

R132n

132

8,6-24,4/9,0-23,1/9.9-21.0/ -

75

2855x1836x2032

2363 - 2495

R160n

160

8,6-28,5/9,2-27,4/9,2-26,0/ -

75

2855x1836x2032

2363 - 2495

R90ne

90

8,86-18,72/8,86-17,78/8,86-15,4/ -

74

2703x1466x2032

2060 - 2420

R110ne

110

8,86-22,96/8,86-21,52/8,86-18,9/ -

74

2703x1466x2032

2060 - 2420

R132ne

132

10,5-27,2/10,7-25,5/11,4-23,1/ -

75

2855x1836x2032

2363 - 2495

R160ne

160

10,1-31,2/10,7-30,6/11,2-27,2/ -

75

2855x1836x2032

2363 - 2495

R190ne

190

18,3-38,3/18,3-33,3/17,8-32,3/ -

80

4000x1930x2146

5930

R225ne

225

18,5-45,3/18,0-42,6/18,7-40,4/ -

80

4000x1930x2146

5930

      

Options

  • Energy recovery system;
  • Automatic start system in case of power outage;
  • Condensate drain valve (for models R37-45, R90-R160);
  • Built-in dryer and compressed air filtration system (for R37-75 models);